sysadmin@dd1# system show nvram
NVRAM Cards:
Card Component Value
---- ----------------------- ----------------------------------------------------------------------
1 Slot 0
Firmware version 0.0.80
Memory size 7.93 GiB
Errors 0 memory (0 uncorrectable), 0 PCI, 0 controller
Flash controller Errors 0 Cfg Err, 0 PANIC, 0 Bus Hang, 0 Bad Blk Warn, 0 Bkup Err, 0 Rstr Err
Board temperature 33 C
CPU temperature 44 C
Number of batteries 1
---- ----------------------- ----------------------------------------------------------------------
NVRAM Batteries:
Card Battery Status Charge Charging Time To Temperature Voltage
Status Full Charge
---- ------- ------ ------ -------- ----------- ----------- -------
1 1 ok 100 % enabled 0 mins 33 C 4.090 V
---- ------- ------ ------ -------- ----------- -------
23 Ocak 2018 Salı
11 Ocak 2018 Perşembe
10 Ocak 2018 Çarşamba
Veritas Appliance / DataCollect
nba1.Support> DataCollect
Gathering release information
Gathering disk performance logs
Gathering command output logs
Gathering dmidecode logs
Gathering ipmitool sel list logs
Gathering ipmitool sel writeraw logs
Gathering fwtermlog logs
Gathering AdpEventLog logs
Gathering smartctl logs
Gathering ipmiutil command output
Gathering iSCSI logs
Gathering BMC Debug logs
Gathering cpu information
Gathering memory information
Gathering os logs
Gathering dfinfo logs
Gathering vxprint logs
Gathering patch logs
Gathering autosupport logs
Gathering sysinfo logs
Gathering sdr logs
Gathering adpallinfo logs
Gathering encinfo logs
Gathering cfgdsply logs
Gathering ldpdinfo logs
Gathering pdlist logs
Gathering fru logs
Gathering adpbbucmd logs
Gathering adpalilog logs
Gathering Test Hardware logs
All logs have been collected in /tmp/DataCollect.zip
Log file can be collected from the appliance shared folder - \\nba1.hayat.com.tr\logs\APPLIANCE
Share can be opened using Main->Support->Logs->Share Open
The Log files DataCollect-SYM0200805-20180110140749.tar.gz collected from the appliance are sent to AutoSupport servers.
The data transmission may complete in several minutes or longer due to file size, network status, appliance performance and other reasons.
=======================End of DataCollect=========================================
All logs have been collected in /tmp/DataCollect.zip
nba1.Support> Return
Appliance Media server appliance configuration.
Exit Log out and exit from the current shell.
Manage Manage NetBackup appliance.
Monitor Monitor NetBackup appliance activities.
Network Network Administration.
Reports Examine the running and historical state of the host.
Settings Change NetBackup appliance settings.
Shell Shell operations.
Support NetBackup Support.
nba1.Main_Menu> Support
Entering NetBackup support view...
Checkpoint Appliance Checkpoint Management.
Cleanup Clean or reset specific appliance monitoring data.
Collect Collect appliance details and transmit to Veritas.
DataCollect Gather device logs.
Disk Gather disk information.
Errors Display NetBackup errors.
Exit Log out and exit from the current shell.
FactoryReset Reset this system to factory install image
FibreTransport Advanced settings.
InfraServices Show/control infrastructure services.
iostat Execute the iostat command.
IPMI Remote management port configuration.
KillRemoteCall Terminate running or hung remote calls on peer compute nodes.
Logs Set level, share, unshare, view, and upload debug logs.
Maintenance Launch maintenance shell.
Messages Display the messages file.
NBDNA Network traces with NBDNA tool (Select Create or Remove).
Nbperfchk Execute the disk IO or network bandwidth check.
NBSU Manage NetBackup support data files (Select Create or Remove).
Processes Show/control NetBackup and Admin Console processes.
Reboot Reboot the system.
RecoverStorage View or delete directories backed up during appliance re-image.
Return Return to the previous menu.
Service Service management.
Shell Shell operations.
Show Display information.
Shutdown Power off the system.
Storage Storage data and configuration
Test Test the current status of various appliance components.
nba1.Support> Logs
Entering Logs view...
Browse Open shell to browse logs.
Delete Delete archived log files.
Exit Log out and exit from the current shell.
GetLevel Get NetBackup log level.
Return Return to the previous menu.
SetLevel Set log level.
Share Share or unshare directory for logs.
Shell Shell operations.
Upload Upload the logs for NetBackup (Select: Time or JobID).
VxLogView Display debug information from vxlogs.
nba1.Logs>
nba1.Logs> Share
Close Open
nba1.Logs> Share Open
- [Info] The network share is now open. You can access the share at \\nba1.hayat.com.tr\logs (CIFS) and nba1.hayat.com.tr:/log (NFS). To ensure appliance security, close the share when you are done downloading the necessary logs.
nba1.Logs> Share Close
- [Info] The network share is now closed.
nba1.Logs>
Gathering release information
Gathering disk performance logs
Gathering command output logs
Gathering dmidecode logs
Gathering ipmitool sel list logs
Gathering ipmitool sel writeraw logs
Gathering fwtermlog logs
Gathering AdpEventLog logs
Gathering smartctl logs
Gathering ipmiutil command output
Gathering iSCSI logs
Gathering BMC Debug logs
Gathering cpu information
Gathering memory information
Gathering os logs
Gathering dfinfo logs
Gathering vxprint logs
Gathering patch logs
Gathering autosupport logs
Gathering sysinfo logs
Gathering sdr logs
Gathering adpallinfo logs
Gathering encinfo logs
Gathering cfgdsply logs
Gathering ldpdinfo logs
Gathering pdlist logs
Gathering fru logs
Gathering adpbbucmd logs
Gathering adpalilog logs
Gathering Test Hardware logs
All logs have been collected in /tmp/DataCollect.zip
Log file can be collected from the appliance shared folder - \\nba1.hayat.com.tr\logs\APPLIANCE
Share can be opened using Main->Support->Logs->Share Open
The Log files DataCollect-SYM0200805-20180110140749.tar.gz collected from the appliance are sent to AutoSupport servers.
The data transmission may complete in several minutes or longer due to file size, network status, appliance performance and other reasons.
=======================End of DataCollect=========================================
All logs have been collected in /tmp/DataCollect.zip
nba1.Support> Return
Appliance Media server appliance configuration.
Exit Log out and exit from the current shell.
Manage Manage NetBackup appliance.
Monitor Monitor NetBackup appliance activities.
Network Network Administration.
Reports Examine the running and historical state of the host.
Settings Change NetBackup appliance settings.
Shell Shell operations.
Support NetBackup Support.
nba1.Main_Menu> Support
Entering NetBackup support view...
Checkpoint Appliance Checkpoint Management.
Cleanup Clean or reset specific appliance monitoring data.
Collect Collect appliance details and transmit to Veritas.
DataCollect Gather device logs.
Disk Gather disk information.
Errors Display NetBackup errors.
Exit Log out and exit from the current shell.
FactoryReset Reset this system to factory install image
FibreTransport Advanced settings.
InfraServices Show/control infrastructure services.
iostat Execute the iostat command.
IPMI Remote management port configuration.
KillRemoteCall Terminate running or hung remote calls on peer compute nodes.
Logs Set level, share, unshare, view, and upload debug logs.
Maintenance Launch maintenance shell.
Messages Display the messages file.
NBDNA Network traces with NBDNA tool (Select Create or Remove).
Nbperfchk Execute the disk IO or network bandwidth check.
NBSU Manage NetBackup support data files (Select Create or Remove).
Processes Show/control NetBackup and Admin Console processes.
Reboot Reboot the system.
RecoverStorage View or delete directories backed up during appliance re-image.
Return Return to the previous menu.
Service Service management.
Shell Shell operations.
Show Display information.
Shutdown Power off the system.
Storage Storage data and configuration
Test Test the current status of various appliance components.
nba1.Support> Logs
Entering Logs view...
Browse Open shell to browse logs.
Delete Delete archived log files.
Exit Log out and exit from the current shell.
GetLevel Get NetBackup log level.
Return Return to the previous menu.
SetLevel Set log level.
Share Share or unshare directory for logs.
Shell Shell operations.
Upload Upload the logs for NetBackup (Select: Time or JobID).
VxLogView Display debug information from vxlogs.
nba1.Logs>
nba1.Logs> Share
Close Open
nba1.Logs> Share Open
- [Info] The network share is now open. You can access the share at \\nba1.hayat.com.tr\logs (CIFS) and nba1.hayat.com.tr:/log (NFS). To ensure appliance security, close the share when you are done downloading the necessary logs.
nba1.Logs> Share Close
- [Info] The network share is now closed.
nba1.Logs>
3 Ocak 2018 Çarşamba
Kaydol:
Kayıtlar (Atom)
Windows Server IIS üzerinden hizmet veren bir FTP servisine erişmek istediğimizde; Internet Explorer, FileZilla vb. uygulamalar ile erişim ...
-
IPMI Tool 1.8.18 This tool provides Serial Over LAN functionality for the VNXe3200, VNXe1600 and Dell EMC Unity hardware products. The I...
-
How to reclaim deduplication storage space manually in NetBackup 5000 series and NetBackup 5200 series appliances For background and over...
-
Generate and capture the sfs_dump data: In this section you will need to know how to connect to your Data Domain via a ssh client,...